Flysight Inc: Flysight BC01 battery charger operation for SpeXman One FPV goggles

Flysight BC01 battery charger operation for SpeXman One FPV goggles

Operation Steps:
Recharging step
1)Install FSBP01 battery into BC01 well, then put 12V_16V power supply into“DC IN” port, the “Red Light” is ON, then the blue light is ON, the battery starts Recharging.

2)Each blue light shows 25% of electric quantity. You can check the electric quantity by the blue light quantity; during recharging process, the blue light.Keeps circularly ON from right to left by order 1 to 4 until all blue lights are off completely, it finishes recharging, you can remove the DC Power supply.

Power up step
1).With recharged battery FSBP01 and BC01, Connect D_tap cable with BC01 and the product well, short press “ON/OFF”,you can check the electric quantity by the blue light quantity;long time press “ON/OFF” until 4th blue light ON, then it starts powering on.

2). With electric consumption, the blue lights will be off from 4 to 1 until the red light is on, this shows the battery is running out of the electric, so please recharge again.

Installing way
In order to be easy for use the battery out of door, the BC01 with a soft magic strap can be fixed on are tightly and safely especially for powering our SpeXman goggles.